- Home
- About Us
- Products
- Vibration Sensors and Accessories
- Motion Amplification Technology
- Vibe Port Remote Monitoring
- Ultrasound Technology
- Oil Inspection Tools
- Felix – Get more out of Asset Condition Monitoring
- Easy-Laser Alignment
- Waites Wireless Sensor Technology
- Training
- Testimonials
- Contact Us
Quality Industrial Condition Monitoring Products,
for a reliability driven world.
Date:May 10, 2012
M12 Connector
HS-100IS and M Series Vibration Sensor
Intrinsically Safe, M12 Connector, Low Profile Industrial Accelerometer
Typical Applications
For offline applications using commercially available intrinsically safe data collectors and online monitoring systems in the fields
of Mining, Offshore, Petrochemical, Gas.
Protecting…
Fans, Motors, Pumps, Compressors, Centrifuges, Conveyers, Air Handlers, Gearboxes, Rolls, Dryers, Presses,
Cooling, HVAC, Spindles, Machine Tooling, Process Equipment and many more.
Technical Performance
Mounted Base Resonance
Sensitivity
Isolation
Measurement Range
Transverse Sensitivity
Frequency Response
Sensitivity
Isolation
Measurement Range
Transverse Sensitivity
Frequency Response
22 kHz (nominal)
100 mV/g ±10% Nominal 80 Hz at 22 ºC
Base isolated
±80 g
Less than 5%
2 Hz to 10 kHz ±5 %
0.8 Hz to 15 kHz ±3 dB
100 mV/g ±10% Nominal 80 Hz at 22 ºC
Base isolated
±80 g
Less than 5%
2 Hz to 10 kHz ±5 %
0.8 Hz to 15 kHz ±3 dB
Electrical
Electrical Noise
Current Range
Bias Voltage
Settling Time
Output Impedance
Case Isolation
Current Range
Bias Voltage
Settling Time
Output Impedance
Case Isolation
0.1 mg max
0.5 mA to 8 mA
10 – 12 Volts DC
2 seconds
200 Ohms max.
>10 8 Ohms at 500 Volts
0.5 mA to 8 mA
10 – 12 Volts DC
2 seconds
200 Ohms max.
>10 8 Ohms at 500 Volts
Environmental
Sensor Temperature Range
Sealing
Maximum Shock
Emissions
Immunity
Certified Temperature Range
Sealing
Maximum Shock
Emissions
Immunity
Certified Temperature Range
-55 to 90°C
IP67
5000 g
EN61000-6-4:2001
EN61000-6-2:1999
Ex ia IIC T6 Ga (-55°C < Ta < +60°C) (Gas)
Ex ia IIIC T80°C IP65 Da (-55ºC < Ta < +60ºC) (Dust)
Ex ia IIC T4 Ga (-55°C < Ta < +110°C) (Gas)*
Ex ia IIIC T130°C IP65 Da (-55°C < Ta < +110°C) (Dust)*
Ex ia I Ma (-55°C < Ta < +110°C) (Mining)
*On request – consult Sales Office
IP67
5000 g
EN61000-6-4:2001
EN61000-6-2:1999
Ex ia IIC T6 Ga (-55°C < Ta < +60°C) (Gas)
Ex ia IIIC T80°C IP65 Da (-55ºC < Ta < +60ºC) (Dust)
Ex ia IIC T4 Ga (-55°C < Ta < +110°C) (Gas)*
Ex ia IIIC T130°C IP65 Da (-55°C < Ta < +110°C) (Dust)*
Ex ia I Ma (-55°C < Ta < +110°C) (Mining)
*On request – consult Sales Office
Mechanical
Case Material
Sensing Element/Construction
Mounting Torque
Mounting Bolt provided
Weight
Maximum Cable length
Mating Connector/Cable Assembly
Mounting Threads
Options
Sensing Element/Construction
Mounting Torque
Mounting Bolt provided
Weight
Maximum Cable length
Mating Connector/Cable Assembly
Mounting Threads
Options
Stainless Steel
PZT/Compression
8 Nm
M6 x 33 mm long, ¼- 28 UNF x 33 mm long
or M8 x 33 mm long
170 gms (nom)
See System drawing
M12 – Straight or Right Angle. Requires screened
cable assembly
See ‘How to order’ table
Mounting cable assemblies and
other sensitivities
PZT/Compression
8 Nm
M6 x 33 mm long, ¼- 28 UNF x 33 mm long
or M8 x 33 mm long
170 gms (nom)
See System drawing
M12 – Straight or Right Angle. Requires screened
cable assembly
See ‘How to order’ table
Mounting cable assemblies and
other sensitivities
Intrinsically Safe Requirements
Maximum Cable Length
See System Drawing
M06-003-B (Armoured)
M06-004-B (PUR)
M06-005-B (Silicone)
M06-003-B (Armoured)
M06-004-B (PUR)
M06-005-B (Silicone)
Certificate details: Group I
IECEx BAS07.0037X
Baseefa07ATEX0149X
EI M1
Ex ia I Ma
(-55ºC < Ta < +110ºC)
Baseefa07ATEX0149X
EI M1
Ex ia I Ma
(-55ºC < Ta < +110ºC)
Certificate details: Group II
IECEx BAS07.0035X
Baseefa07ATEX0144X
EII 1GD
Ex ia IIC T4 Ga
Ex ia IIIC T130ºC IP65 Da
(-55ºC < Ta < +110ºC)
Baseefa07ATEX0144X
EII 1GD
Ex ia IIC T4 Ga
Ex ia IIIC T130ºC IP65 Da
(-55ºC < Ta < +110ºC)
Certificate details: Group II
IECEx BAS07.0035X
Baseefa07ATEX0144X
EII 1GD
Ex ia IIC T6 Ga
Ex ia IIIC T80ºC IP65 Da
(-55ºC < Ta < +60ºC)
Baseefa07ATEX0144X
EII 1GD
Ex ia IIC T6 Ga
Ex ia IIIC T80ºC IP65 Da
(-55ºC < Ta < +60ºC)
Accelerometer System Certificate
Baseefa07Y0145
Ex ia IIC T6 (-55°C < Ta < +60°C)
Ex ia IIC T4 (-55ºC < Ta < +110ºC)
On request – consult Sales Office
Ex ia IIC T6 (-55°C < Ta < +60°C)
Ex ia IIC T4 (-55ºC < Ta < +110ºC)
On request – consult Sales Office
System Connections
Drawing M06-003-B (Armoured)
Drawing M06-004-B (PUR)
Drawing M06-005-B (Silicone)
Drawing M06-004-B (PUR)
Drawing M06-005-B (Silicone)
Terminal Parameters
Ui = 28V, Ii = 93mA, Pi = 0.65W
500V Isolation
Units Will Pass A 500V Isolation Test
Barrier
1 x Pepperl + Fuchs Galvanic Isolator
KFD2-VR4-Ex1.26 (BAS02ATEX7206)
sheet 1 of M06-003-B, M06-004-B and M06-005-B.
1 x MTL Zener Barrier MTL7728 (BAS01ATEX7217)
or Pepperl + Fuchs Zener Barrier
Z728 (BAS01ATEX7005) or any other barrier that
conforms to note 2 of sheet 2 of M06-003-B,
M06-004-B and M06-005-B.
KFD2-VR4-Ex1.26 (BAS02ATEX7206)
sheet 1 of M06-003-B, M06-004-B and M06-005-B.
1 x MTL Zener Barrier MTL7728 (BAS01ATEX7217)
or Pepperl + Fuchs Zener Barrier
Z728 (BAS01ATEX7005) or any other barrier that
conforms to note 2 of sheet 2 of M06-003-B,
M06-004-B and M06-005-B.
Notes:
Special conditions of safe use for Group II dust. The free end of the cable on the integral cable version of the apparatus must be terminated in an appropriately dust-proof enclosure.
