2 Pin MS Connector, 4-20mA ‘g’ Sensor for PLC Interface
Low cost on-line means of monitoring with the capability of interfacing direct into PLC, BMS or any 4-20mA input module. Proven use in vibration monitoring for offline applications using commercially available data collectors.
Fans, Motors, Pumps, Compressors, Centrifuges, Conveyers, Air Handlers, Gearboxes, Rolls, Dryers, Presses, Cooling, HVAC, Spindles, Machine Tooling, Process Equipment and many more.
Mounted Base Resonance Acceleration Ranges Frequency Response Isolation Measurement Range Transverse Sensitivity
10 kHz min. 0-1 to 0-100 g RMS ± 10% Nominal 80 Hz at 22 °C 10 Hz to 5 kHz at ±5% -ISO10816 Base isolated 50 g peak Less than 5%
Output Current Supply Voltage Settling Time Output Impedance Case Isolation
4-20 mA DC proportional to ‘g’ 15 – 30 Volts DC (for 4-20 mA) 2 seconds Loop Resistance 600 Ohms max. at 24 Volts >10 8 Ohms at 500 Volts
Operating Temperature Range Sealing Maximum Shock Emissions Immunity
-25 to 90 ºC IP68 5000 g EN61000-6-4:2007 EN61000-6-2:2005
Case Material Sensing Element/Construction Mounting Torque Weight Mating Connector Mounting Threads Options
Stainless Steel PZT/Compression 8 Nm 140 gms (nom) HS-AA004 See ‘How to order’ table Ranges, filters, other cable lengths, intrinsically safe