- Home
- About Us
- Products
- Vibration Sensors and Accessories
- Motion Amplification Technology
- Vibe Port Remote Monitoring
- Ultrasound Technology
- Oil Inspection Tools
- Felix – Get more out of Asset Condition Monitoring
- Easy-Laser Alignment
- Waites Wireless Sensor Technology
- Training
- Testimonials
- Contact Us
Quality Industrial Condition Monitoring Products,
for a reliability driven world.
Date:May 20, 2012
2 Pin MS Connector
HS-420 Series Vibration Sensor
2 Pin MS Connector, 4-20mA Velocity Transducer for PLC Interface
Typical Applications
Low cost on-line means of monitoring with the capability of interfacing direct into PLC, BMS or any 4-20mA input module. Proven use in vibration monitoring for offline applications using commercially available data collectors.
Protecting…
Fans, Motors, Pumps, Compressors, Centrifuges, Conveyers, Air Handlers, Gearboxes, Rolls, Dryers, Presses, Cooling, HVAC, Spindles, Machine Tooling, Process Equipment and many more.
Technical Performance
Mounted Base Resonance
Velocity Ranges
Frequency Response
Isolation
Measurement Range
Transverse Sensitivity
Velocity Ranges
Frequency Response
Isolation
Measurement Range
Transverse Sensitivity
5 kHz min.
0-10 to 0-100 mm/sec RMS ±10% Nominal 80 Hz at 22 °C
10 Hz to 1 kHz ±5% – ISO10816
Base isolated
50 g peak
Less than 5%
0-10 to 0-100 mm/sec RMS ±10% Nominal 80 Hz at 22 °C
10 Hz to 1 kHz ±5% – ISO10816
Base isolated
50 g peak
Less than 5%
Electrical
Output Current
Supply Voltage
Settling Time
Output Impedance
Case Isolation
Supply Voltage
Settling Time
Output Impedance
Case Isolation
4-20 mA DC proportional to RMS velocity (mm/s)
15 – 30 Volts DC (for 4-20 mA)
2 seconds
Loop Resistance 600 Ohms max. at 24 Volts
>10 Ohms at 500 Volts
15 – 30 Volts DC (for 4-20 mA)
2 seconds
Loop Resistance 600 Ohms max. at 24 Volts
>10 Ohms at 500 Volts
Environmental
Operating Temperature Range
Sealing
Maximum Shock
Emissions
Immunity
Sealing
Maximum Shock
Emissions
Immunity
-25 to 90 ºC
IP67
5000 g
EN61000-6-4:2001
EN61000-6-2:1999
IP67
5000 g
EN61000-6-4:2001
EN61000-6-2:1999
Mechanical
Case Material
Sensing Element/Construction
Mounting Torque
Weight
Mating connector
Mounting Threads
Options
Sensing Element/Construction
Mounting Torque
Weight
Mating connector
Mounting Threads
Options
Stainless Steel
PZT/Compression
8 Nm
155 gms (nom)
HS-AA004
See ‘How to order’ table
Ranges, filters, mating cable, assemblies, intrinsically safe
PZT/Compression
8 Nm
155 gms (nom)
HS-AA004
See ‘How to order’ table
Ranges, filters, mating cable, assemblies, intrinsically safe
