news

LUBExpert Case Study: 70% of bearings are still OVER lubricated

Bearings need grease, however… 

It’s a common misconception that if a little grease is good then a lot means better. WRONG!

Too much grease will overheat a bearing causing separation of the oil from its thickener and will begin to run out of the bearing. This can set off a chain reaction resulting in lack of lubrication & hardening of the thickener which left unchecked will cause major issues.

Many studies have shown that only 33% of the open space within a bearing needs to be filled to achieve optimum friction reduction. 

33%? How do you that?

ALS Global (Australia’s largest condition monitoring service provider) conducted an independent study over an 18 month period using the LUBExpert. The device was used across a large volume of grease lubricated bearings which were historically replenished using fixed calculated / time based rates.

Find out why ALS now choose the LUBExpert as their preferred method of lubrication. Download the full case study below.

 

How are you lubricating your bearings?

 

Save Time. Save Grease. Save Bearings. Use LUBExpert and ‘Grease Bearings Right’.

What are you looking for?